1. Natural Rubber (NR) hmanga siam a ni.
Performance ziarang hrang hrang
Elasticity a ni: Tensile elongation 1000% thleng, resilience tha tak nei (rebound resilience > 70%).
Mechanical chakna a nei: Tensile strength hi 20–30 MPa inkar a ni a, tear resistance chu 50–60 kN/m a ni.
Temperature Range a ni: -5℃atanga 80℃(service temperature limit) thleng a ni.
Chemical laka inven theihna: Oil, ozone, leh acid/base chak tak tak lakah a hlauhawm.
A hman dan tlangpui
Pneumatic tires (khawvel puma NR hman zat 70% vel), vibration isolators, leh non-oil environment-a conveyor belt te.

2. Nitrile Butadiene Rubber (NBR) hmanga siam a ni.
Performance ziarang hrang hrang
Oil Resistance a ni: A hring chhuak rate<10% in ASTM #3 oil at 70°C for 70h.
Mechanical lama thil awm dan: Tensile strength 15–25 MPa, abrasion resistance tha tak nei.
Temperature Range a ni: -20℃atanga 100℃(hun rei lote chhunga 120℃thleng ).
A tihkhawtlai theihna: Ozone resistance tha lo leh temperature flexibility hniam-temperature flexibility.
A hman dan tlangpui
Motor engine, fuel hose, leh petrochemical hmanruaa gasket dahna tur seal.
3. Silicone Rubber (VMQ) hmanga siam a ni.
Performance ziarang hrang hrang
Temperature a sang lutuk: -60℃atanga 250℃(service chhunzawm zel), thermal stability 300℃thleng .
Biocompatibility a awm thei: Damdawi lam dilna atan USP Class VI certified a ni.
A tihkhawtlai theihna: Mittui tlak chakna hniam (<10 kN/m) and poor oil resistance.
A hman dan tlangpui
Semiconductor siamnaah hian medical catheter, aerospace seal, leh high-temperature gasket te hman a ni.
4. Chloroprene Rubber (CR) hmanga siam a ni.
Performance ziarang hrang hrang
Khaw lum leh khaw vawt laka inven theihna: Ozone resistance class A (ASTM D1149), UV stability >Kum 5 chhung chu pawnah a awm.
Temperature Range a ni: -30°C to 100°C, with flame-retardant properties (oxygen index >38).
Mechanical chakna a nei: Tensile strength 25–35 MPa, mittui tlak lohna 30–40 kN/m.
A hman dan tlangpui
Wire leh cable insulation, roofing membrane, leh fire hose liners te a awm bawk.
5. Fluoroelastomer (FKM) hmanga siam a ni.
Performance ziarang hrang hrang
Chemical laka inven theihna: H2SO4 (98%), NaOH (50%), leh aviation fuel te lakah a do thei.
Temperature Range a ni: -20℃atanga 260℃thleng, hun rei lote chhunga 300℃thlenga stability awm thei.
Mechanical lama thil awm dan: Tensile chakna 15–20 MPa, compression set a ni<20% at 200°C for 70h.
A hman dan tlangpui
Chemical reactor, aerospace engine component, leh downhole oil hmanruaah te seal siam a ni.

Material thlan dan tur kaihhruaina
| Performance neih a ngai | Rubber Type atana tha ber |
|---|---|
| Elasticity/wear resistance sang tak a nei | Natural Rubber (NR) hmanga siam a ni. |
| Oil/media laka invenna a ni | Nitrile Butadiene Rubber (NBR) hmanga siam a ni. |
| Temperature tolerance nasa tak a nei | Silicone Rubber (VMQ) hmanga siam a ni. |
| Pawn lama khaw lum leh khaw vawt | Chloroprene Rubber (CR) hmanga siam a ni. |
| Chemical boruak khauh tak tak | Fluoroelastomer (FKM) hmanga siam a ni. |
He tehkhin thu hian rubber material property leh operational demand nena inmil a pawimawhzia a tilang chiang hle. Engineer leh material scientist te chuan he framework hi hmang tangkaiin industrial sector hrang hranga component rintlak leh lifecycle costs te chu an ti tha thei ang.



